Dantherm CDT 30S Professional Dehumidifier
34.4 Litres

Dantherm CDT 30S Professional Dehumidifier

High quality portable dehumidifier designed for professional drying & flood damage restoration

The Dantherm CDT 30S refrigerant dehumidifier can remove up to 34.4 litres of water from the air in 24 hours. Designed for professional use in the building or flood damage restoration sectors, it has an operating range of 3°C - 35°C and an airflow rate of 350m³/h. It also features a 1kW heating element, which warms up the dry processed air to improve drying efficiency, while a high pressure fan and two x Ø100 mm air ducts allow flexible ducting (max length 5m) to be connected to the dehumidifier, to aid with drying under flood boards and in crawl spaces.

The Dantherm CDT 30S has an outer casing made from powder coated hot galvanized steel, while both the evaporator and condenser are epoxy coated for protection. Large bumpers around the edge offer protection from knocks and bumps. An automatic defrosting function flushes the evaporator with hot gas if it reaches 5℃ and ice begins to form on the surface. It has large rubber wheels and an adjustable handle, making it portable. The dehumidifier can be wheeled around a site without issues, so you can place it where it is required. It is also stackable for convenient storage and transport when not in use.

Featuring a digital control pad that displays usage hours, energy consumption, temperature, relative humidity, service information, faults and when the tank is full, this Dantherm dehumidifier offers a professional solution to drying out rooms following floods, leaks, burst pipes, construction and restoration work. It uses eco-friendly R454c refrigerant, which is non-toxic and meets all of the 2020 EU regulations for safe use in climate control equipment.

The Dantherm CDT30S mobile dehumidifier comes with a 7 litre water collection tank, but can be connected to a half-inch hose for continus gravity fed condensate drainage. You can upgrade the unit with condensate pump cassette, which pumps the water away up to 10m and even has a vertical lift capability of three metres, ideal for use in basements and cellars. Other additional extras include a remote hygrostat, which allows you to set the desired humidity level and switches the dehumidifier on and off as required automatically.

Dantherm CDT 30S Dehumidifier Specs
Operating range – humidity: 40-100% RH
Operating range – temperature: 3-35°C
Dehumidification capacity at 30°C/80% RH: 34.4 L/24h
Air volume: 350 m³/h
Power supply: 230 V/50 Hz
Max. power consumption: 1.8 kW
Refrigerant: R454c
Sound level (at 1 metre): 56 dB(A)
Water container capacity: 7 litres
Height (Handle up): 736mm
Width: 426mm
Depth: 506mm
Weight: 33kg

Extracts Up To 34.4L/Day: Offers great capacity and performance for water damage restoration, construction drying and more with a broad working temperature range of 3°C up to 35°C.

Two Air Ducts: Two 100mm air ducts on the back of the unit and a high pressure fan allow for the connection of flexible ducting (max length 5m), ideal for assisting with drying under floor boards and in crawl spaces.

1kW Heating Element: Warms up the dry processed air so that it can collect more moisture as it circulates back into the area.

Airflow Rate Of 350m³/h: Draws in large volumes of humid air to help remove moisture quickly and efficiently.

Eco-Friendly Refrigerant: The Dantherm CDT30S MKIII uses the new, cleaner R454c refrigerant that is more efficient than previous gases and meets 2020 EU regulations.

7L Water Tank: Large internal condensate colleciton tank, which needs to be emptied at regular intervals.

Gravity Fed Drainage: Permanent gravity fed drainage is possible via a half-inch hose connection on the dehumidifier. Allows the dehumidifier to be used continuously without needing to empty the tank.

Condensate Pump Kit Available: A condensate pump cassette with a 10m hose is available as an accessory. This allows the unit to pump the condensate to a drain up to 10m from the dehumidifier and has a vertical lift capability of 3 metres. Ideal for use in basements and cellars.

Optional Hygrostat: The optional hygrostat comes with a 3m cable and allows you to set a desired humidity level within the space. The hygrostat will switch the dehumidifier on and off automatically in order to maintain the set humidity level, saving energy and adding extra convenience.

Digital Control Pad: An easy to read screen display allows for superior control, quick access to settings, and detailed readouts of the dehumidifier. It displays accurate room humidity, temperature, energy consumption, service status, and allows for easy fault finding.

Galvanised Steel Casing: The outer casing is manufactured from powder coated hot galvanized steel and the evaporator and condenser are epoxy coated, for protection and durability on site.

Hot Gas Defrost: If the evaporator reaches 5℃, the solenoid valve flushes the evaporator with hot gas. Once a preset temperature is reached, the dehumidifier resumes regular operation, ensuring efficient performance in colder conditions.

Portable Design: The adjustable handle and large durable wheels allow for excellent mobility between rooms and even up stairs and down to basements.

Stackable: Ideal for easy storage and transportation.